REQUEST A QUOTE
| Output | WirelessHART communication interface Transmission rate: Nominal 250 kBits/s Operating frequency: 2.4 GHz (ISM band) Transmission range under reference conditions: Outdoor 250 m, indoor 50 m |
|---|---|
| Display | Integral via 3 LEDs |
| Measuring principle | WirelessHART |
| Function | Intelligent WirelessHART interface module for connection to 4...20 mA/HART devices |
| Certification | Non-hazardous area ATEX, CSA, IEC Ex, JPN Ex |
| Input | One point-to-point with a HART device, or One point-to-point connection with a 4...20 mA device, or Up to four HART field devices connected in multidrop mode if a wide range power unit is used. |
| Output | WirelessHART communication interface Transmission rate: Nominal 250 kBits/s Operating frequency: 2.4 GHz (ISM band) Transmission range under reference conditions: Outdoor 250 m, indoor 50 m |
| Auxiliary power supply / Loop power supply | Special long live Lithium Thionylchloride battery pack 24-230V AC/DC external power DC power unit |
| Dimensions (wxhxd) | W x H x D: 111.5 mm x 189.9 mm x 92.8 mm Dimensions in mm 25.4 mm = 1 inch |
| Software | Internal software for controlling, powering, and reading from 4…20 mA/HART field devices |
| Operation | Integral via Pushbutton, PC configuration via DTM and FieldCare or DD |
| Display | Integral via 3 LEDs |
| Operating Voltage | Special long live Lithium Thionylchloride battery pack For versions with electronically regulated power supply: Wide-range power supply: 24 V...230 V AC/DC ± 10%, 50/60 Hz DC power unit: 8 V...50 V DC ± 10% In the event of an external power supply failure, wireless communication is maintained for at least one hour by means of an internal supply. |
Returns Policy
