Endress+Hauser Vibronic Point level detection Liquiphant FTL51C

Write a Review

REQUEST A QUOTE

Endress+Hauser Vibronic Point level detection Liquiphant FTL51C
Process temperature-50 °C...+150 °C
(-58 °F...+302 °F)
up to 230 °C / 450°F on request
Process pressure / max. overpressure limitVacuum...40 bar
(Vacuum...580 psi)
Min. density of medium0.5g/cm³ (0.4g/cm³ optional)
Measuring principleVibration Liquids
Characteristic / ApplicationHigh protection against aggressive media by using antistatic coating
Modular housing concept
wide range of process connections
Analogue and bus interfaces
Extensive certificate range (e.g.Ex,WHG)
pipe extension up to 3m (6m option)
SpecialitiesFoamdetection
Detekt a densitychange
second line of defense
Supply / CommunicationPROFIBUS PA
19...253V AC, 2-wire
10...55V DC-PNP, 3-wire
DPDT, 19...253V AC, 10...55V DC
8/16mA, 11...36V DC
NAMUR
PFM, 2-wire
NAMUR with testbutton
Ambient temperature-50 °C...+70 °C
(-58 °C...+158 °F)
Process temperature-50 °C...+150 °C
(-58 °F...+302 °F)
up to 230 °C / 450°F on request
Process pressure / max. overpressure limitVacuum...40 bar
(Vacuum...580 psi)
Min. density of medium0.5g/cm³ (0.4g/cm³ optional)
Main wetted partsECTFE
PFA (Edlon)
PFA (Rubyred)
PFA (conductive)
Enamel
Process connectionFlange:
DN25...DN100,
ASME 1"...3",
JIS RF10 K 50
Process connection hygienicFDA conform with PFA (Edlon)
Sensor lengthECTFE, PFA 130mm, 148mm...3000mm
(ECTFE, PFA 5.12", 5.83"...118")
Enamel 130mm, 148mm...1200mm
(Enmal 5.12", 5.83"...47.24")
CommunicationPROFIBUS PA
19...253V AC
10...55V DC-PNP
19...253V AC bzw 10...55V DC
8/16mA, 11...36V DC
NAMUR
PFM
Certificates / ApprovalsATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
Safety approvalsSIL2/ SIL3
Design approvalsEN 10204-3.1
Marine approvalGL/ ABS/ DNV
OptionsHeavy duty stainless steel housing mainly for the oil and gas industry
ComponentsFTL325P/FTL375P Interface PFM
FTL325N/FTL375N Interface NAMUR
Measuring principleVibration Density
Characteristic / ApplicationLiquiphant M Density
with Density Computer FML621
Temperature and pressure measurement
High protection against aggressive media by using antistatic coating
Modular housing concept
Wide range of process connections
Pipe extension up to 3 m (6 m option)
Supply / CommunicationTransmitter power supply (MUS)
Ambient temperature-50...80°C
-50...60°C for hazardous applications
Process temperature0...80 °C (validity of accuracy data)
-50...0°C / 80...150 °C (with reduced technical data)
Process pressure0...25 bar
>25...40 bar (with reduced technical data)
Wetted partsECTFE, PFA and Enamel
Sensor length115...3000 mm
(depends by the covering)
OutputPulse
Certificates / ApprovalsATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
SpecialitiesCommissioning with ReadWin2000
ComponentsDensity Computer FML621
Measuring rangeDensity range: 0.3 to 2 g/cm³
Other approvals and certificatesSIL2/ SIL3
Returns Policy

Related Products

Top