REQUEST A QUOTE
| Max. measurement error | Volume flow (standard): - ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s) Volume flow (option): - ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s) |
|---|---|
| Measuring range | 0.5 to 10 m/s (1.6 to 33 ft/s) |
| Medium temperature range | -40 to +150 °C (-40 to +302 °F) -40 to +200 °C (-40 to +392 °F) optional |
| Max. process pressure | PN 40 / ASME Cl. 300 / JIS 20K |
| Wetted materials | Sensor: A351-CF3M (DN25 to 100) 1.4404/TP316/TP316L or A106 GrB (DN150 to 300) Transducer: 1.4404/316/316L Flanges : 1.4404/316/316L or A105/1.0432 |
| Measuring principle | Ultrasonic flow |
| Product headline | Higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs. Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry. |
| Sensor features | Safe design for process industries – international hazardous area approvals. No additional pressure loss – full-bore design. Process transparency – diagnostic capability. Full compliance according to NACE MR0175 and MR010. Nominal diameter: DN 25 to 300 (1 to 12"). Medium temperature: –40 to 200 °C (–40 to 392 °F). |
| Transmitter features | Easy installation and reduced installation costs – loop-powered transmitter. Fully industry compliant – IEC/ATEX/FM/CSA/JPN/NEPSI. Automatic recovery of data for servicing. Device as compact or remote version. 2-line backlit display with push buttons. HART, PROFIBUS PA, FOUNDATION Fieldbus. |
| Nominal diameter range | 2 path version: DN80 to 300 (3 to12") 3 path version: DN25 to 50 (1 to 2") 4 path version: DN 80 to 300 (3 to 12") |
| Wetted materials | Sensor: A351-CF3M (DN25 to 100) 1.4404/TP316/TP316L or A106 GrB (DN150 to 300) Transducer: 1.4404/316/316L Flanges : 1.4404/316/316L or A105/1.0432 |
| Measured variables | Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength |
| Max. measurement error | Volume flow (standard): - ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s) Volume flow (option): - ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s) |
| Measuring range | 0.5 to 10 m/s (1.6 to 33 ft/s) |
| Max. process pressure | PN 40 / ASME Cl. 300 / JIS 20K |
| Medium temperature range | -40 to +150 °C (-40 to +302 °F) -40 to +200 °C (-40 to +392 °F) optional |
| Ambient temperature range | -40 to +60 °C (-40 to +140 °F) compact -40 to +80 °C (-40 to +176 °F) remote sensor -40 to +60 °C (-40 to +140 °F) remote transmitter |
| Transmitter housing material | AlSi10Mg, coated |
| Degree of protection | IP67, type 4X enclosure IP68 type 6P enclosure (option for remote) |
| Display/Operation | 2 lines backlit display with 3 push buttons |
| Outputs | 1x 4-20 mA HART 1x Pulse/frequency/switch output (passive) |
| Inputs | N/A |
| Digital communication | HART, Profibus PA, FOUNDATION Fieldbus |
| Power supply | 2 wire loop powered |
| Hazardous area approvals | ATEX,FM, CSA, JPNm UK Ex |
| Other approvals and certificates | 3.1 material (wetted parts), calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000 PED, EAC marking |
| Product safety | EAC marking |
| Metrological approvals and certificates | calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) |
| Pressure approvals and certificates | CRN, PED, AD2000 |
| Material certificates | 3.1 material (wetted parts) |
Returns Policy
