REQUEST A QUOTE
| Measurement range | Standard sensor: 0 to 60 mg/l, 0 to 600 %SAT, 0 to 1200 hPa, 0 to 100 Vol% Trace sensor: 0 to 10 mg/l, 0 to 120 %SAT, 0 to 250 hPa, 0 to 25 Vol% |
|---|---|
| Process temperature | -5 to 135 °C (23 to 275 °F) |
| Process pressure | 1 to 12 bar abs (14.5 to 174 psi) |
| Measuring principle | Amperometric oxygen measurement |
| Application | Typical applications are: - Pharmaceuticals and biotechnology: process control in enzyme production, control of culture preparations . - Water treatment: boiler feed water, WFI (Water for Injection) - Residual oxygen measurement in processes |
| Installation | Installation |
| Characteristic | Digital hygienic amperometric oxygen sensor with maximum measurement stability over several sterilization cycles available in two measuring ranges |
| Measurement range | Standard sensor: 0 to 60 mg/l, 0 to 600 %SAT, 0 to 1200 hPa, 0 to 100 Vol% Trace sensor: 0 to 10 mg/l, 0 to 120 %SAT, 0 to 250 hPa, 0 to 25 Vol% |
| Measuring principle | Measuring principle |
| Design | Design |
| Material | Sensor shaft: Stainless steel 1.4435 (AISI 316L) Process seal: FKM (USP<87>, <88> Class VI and FDA) Process seal for Ex versions: FKM (not FDA compliant) Seals/O-rings: EPDM (USP<87>, <88> Class VI and FDA), FKM (FDA) Shaft sleeve: Stainless steel 1.4435 (AISI 316L) or Titanium or Hastelloy Membrane cover layer: Silicone (USP<87>, <88> Class VI and FDA) |
| Dimension | Diameter: 12 mm (0.47 inch) Shaft length: 120, 160, 220, 320, 420 mm (4.72, 6.30, 8.66, 12.60 und 16.54 inch) |
| Process temperature | -5 to 135 °C (23 to 275 °F) |
| Process pressure | 1 to 12 bar abs (14.5 to 174 psi) |
| Temperature sensor | NTC 22k |
| Connection | Inductive, contactless connection head with Memosens 2.0 technology |
| Ingress protection | IP68 |
| Additional certifications | Additional certifications |
Returns Policy
