REQUEST A QUOTE
| Accuracy | Repeatablity 0,1% |
|---|---|
| Process temperature | -80°C...200°C -112°F...392°F |
| Process pressure / max. overpressure limit | Vacuum ... 100 bar (Vaccum ... 1450 psi) |
| Max. measurement distance | 0.1 m ... 4.0 m (0.3 ft ... 13 ft) |
| Main wetted parts | Insulation material: PTFE,PFA 316L |
| Measuring principle | Capacitive |
| Characteristic / Application | Fully insulated rod probe, for standart- and extreme process conditions (temperature, pressure, build-up) |
| Interface measurement | Interfaces liquid / liquid also with emulsion layers |
| Specialities | Inactive length Factory calibrated short response time by change of value |
| Supply / Communication | 12-36V DC HART PFM |
| Accuracy | Repeatablity 0,1% |
| Linearity error for conductive liquids | <0,25% |
| Ambient temperature | -50°C...+70°C -58°F...+158°F |
| Process temperature | -80°C...200°C -112°F...392°F |
| Process pressure / max. overpressure limit | Vacuum ... 100 bar (Vaccum ... 1450 psi) |
| Main wetted parts | Insulation material: PTFE,PFA 316L |
| Process connection | G1/2, G 3/4, G 1, G1 1/2 /NPT 1/2, NPT 3/4, NPT 1", NPT1 1/2 Flanges from DN25.../ASME 1".../JIS... |
| Process connection hygienic | Tri-Clamp ISO02852 gap free plated Dairy coupling Flush-mounted seal |
| Sensor length | Total length: 6m (20ft) Inactive length: max. 2m (7ft) |
| Max. measurement distance | 0.1 m ... 4.0 m (0.3 ft ... 13 ft) |
| Communication | 4...20mA HART PFM |
| Certificates / Approvals | ATEX, FM, CSA, IEC Ex, TIIS, INMETRO, NEPSI, EAC |
| Safety approvals | SIL |
| Design approvals | EN 10204-3.1 NACE MR0175 |
| Hygienic approvals | 3A, EHEDG |
| Marine approval | GL/ ABS/ DNV |
| Options | Separate housing gas-tight probe seal |
| Application limits | Insufficient clearance towards ceiling Changing, non-conductive media, conductivity < 100 μS/cm Notice the pressure and temperature derating |
Returns Policy
