Endress+Hauser
Endress+Hauser 71537839 1-/2-channel transmitter bundle with 4-wire field meter
REQUEST A QUOTE
You have an installed base with 4-wire devices and still want to benefit from the advantages of the Liquiline Compact CM82 2-wire transmitter (compact design, Memosens technology, Bluetooth, use in hazardous areas)? Then this bundle is just right for you, as the RIA46 field meter powers up to two CM82 devices simultaneously. This allows you to set up two CM82 measuring points with any combination of pH, ORP, oxygen and conductivity sensors with Memosens technology in your 4-wire environment. | |
Use the CM82 2-wire transmitter in a 4-wire environment | Thanks to its integrated loop power supply, the RIA46 4-wire field meter is able to power one or even two 2-wire transmitters of the Liquiline CM82 series. This allows you to perfectly use the compact and robust field transmitter with your 4-wire infrastructure. |
---|---|
True multiparameter transmitter with Memosens technology | Liquiline Compact CM82 is a multiparameter transmitter that can accommodate pH, ORP, conductivity and oxygen sensors. Thanks to Memosens technology and the automatic sensor recognition, within seconds you can replace worn sensors or switch to a sensor of a different measurement parameter. |
Optional Bluetooth connection | You can connect your CM82 transmitters to your existing smartphones and tablets via a particularly secure Bluetooth connection. This allows you to commission and operate your CM82 measuring points conveniently as well as retrieve measured values and sensor information from a distance. Alternatively, the RIA46 display indicates the measured values of the connected sensors on-site. |
Visual indication of status diagnostics | The CM82 transmitter is equipped with a red/green LED that permanently displays the diagnostic results of the transmitter and the connected sensor, thus enabling a quick and easy status check on-site. |
Suitable for hazardous areas | With its international explosion protection approvals, such as IECEx, ATEX, and CSA, the Liquiline Compact CM82 is suitable for hazardous area use. Therefore, it is possible to mount the CM82 in a hazardous area even if the RIA46 is installed in a non-hazardous area. |
Measuring principle | Potentiometric |
Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
Installation | Connection of digital sensors with Memosens-Protocol |
Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
Connection | Connection of digital sensors with Memosens-Protocol |
Ingress protection | IP67, IP68, NEMA Type 6 |
Input | One channel transmitter |
Output / communication | 4 to 20 mA, HART |
Additional certifications | CE, CSA C/US GP |
Measuring principle | Potentiometric |
Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
Installation | Connection of digital sensors with Memosens-Protocol |
Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
Connection | Connection of digital sensors with Memosens-Protocol |
Ingress protection | IP67, IP68, NEMA Type 6 |
Input | One channel transmitter |
Output / communication | 4 to 20 mA, HART |
Measuring principle | Potentiometric |
Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
Installation | Connection of digital sensors with Memosens-Protocol |
Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
Connection | Connection of digital sensors with Memosens-Protocol |
Ingress protection | IP67, IP68, NEMA Type 6 |
Input | One channel transmitter |
Output / communication | 4 to 20 mA, HART |
Measuring principle | Potentiometric |
Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
Installation | Connection of digital sensors with Memosens-Protocol |
Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
Connection | Connection of digital sensors with Memosens-Protocol |
Input | One channel transmitter |
Output / communication | 4 to 20 mA, HART |
Measuring principle | Indicators with control unit |
Measuring principle | Field meter with control unit |
Function | Display Loop Power Supply Transmitter Functionality Barrier Signal Isolation Calculation Limit Alarm |
Display | Multicolor backlight LCD White/black/yellow Bargraph Unit TAG Alarm warning in plain text |
Power Supply | 20...250V AC/DC |
Input | 2 x universal (U, I, R, RTD, TC) |
Output | 2 x analogue output (I, U) 1 x loop power supply |
Output | 2 x analogue output (I, U) 1 x loop power supply |
Software functions | Linearization Minimum value per channel Maximum value per channel Calculation Band value monitoring |
Certificates | ATEX II(1)GD [Ex ia] IIC CSA General Purpose CSA AIS, NI/I/2/ABCDEFG/T4 FM AIS, NI/I/2/ABCDEFG/T4 TIIS [Ex ia] IIC NEPSI [Ex ia] IIC UK II(1)G [Ex ia Ga] IIC, II(1)D [Ex ia Da] IIIC |
SIL | 2 |
Panel mounting | field |
Measuring principle | Display |
Function | Display Loop Power Supply Transmitter Functionality Barrier Signal Isolation Calculation Limit Alarm |
Certification | ATEX II (1) GD [Ex ia] 4C CSA AIS NI/I/2 ABCDEFG/T4 FM AIS NI/I/2 ABCDEFG/T4 UR C/US |
Input | 2 x universal (U, I, R, RTD, TC) |
Output | 2 x analogue output (I, U) 1 x loop power supply |
Relay output | 2 x changeover contact 1 x open collector |
Auxiliary power supply / Loop power supply | 20...250V AC/DC |
Dimensions (wxhxd) | Field housing: 199 x 133 x 96 mm (7.83" x 5.24" x 3.78") |
Software | Linearization Minimum value per channel Maximum value per channel Calculation Band value monitoring |
Operation | 3 keys Interface CDI to USB at PC + configuration software FieldCare |
Display | Multicolor backlight LCD White/black/yellow Bargraph Unit TAG Alarm warning in plain text |
Returns Policy