131F2954 | Danfoss FC 302 110kW inverter drive 212 A, Three Phase with a 380...480V AC supply

Built-in Smart Logic Controller

The built-in Smart Logic Controller is a simple but clever way to keep your inverter, motor and application working together.

The controller monitors a specified event. When an event occurs, the controller performs a pre-defined action and then starts monitoring for the next pre-defined event. 20 steps of events and resulting actions are available before returning to the first set.

Logic functions can be selected and run independent from the sequence control. This enables drives to monitor variables or signal defined events in an easy and flexible way independently of the motor control.

Award-winning control panel

The control panel on the VLT AutomationDrive FC302 has won the iF Design Award so you don't just have to take our word for it that it's great. Hot pluggable, remote mountable and easy-to-use, the local control panel makes it easier than ever to control your Danfoss inverter drive.

• Graphical display with bar and graphs
• 28 languages selectable
• Hot pluggable
• Settings are transferred easily from one control panel to another
• Up and download functionality
• Manual speed/torque setting
• Based on well-known matrix menu structure
• Personal & Danfoss defined quick menus
• Active buttons are illuminated
• Edit and operate in different set ups simultaneously
• Logging menu for access to operation history

Save on energy costs

131F2954 and the rest of VLT FC302 AutomationDrive series provide energy efficient, adaptive motor control. Using an inverter drive to control the speed of your electric motor is proven to reduce energy costs. For example, if you reduce the speed of a motor from 100% to 80% in applications such as pumps or fans, you can save 50% of energy. Reduce the speed to 50% and you can save 80% of energy.

Pluggable options for your 110 kW inverter drive

A flexible option structure makes the VLT AutomationDrive much more adaptable than many other inverter drives. This 110 kW AC drive has many options available from Fieldbus to safety options:

• Fieldbus options - Profibus, DeviceNet, CanOpen, Profinet, Ethernet IP and Modbus TCP
• I/O and feedback options - General purpose I/O, Encoder, Resolver, Relay, 24V input option for control voltage, Extended Relay Card, Sensor Input
• Safety options - Safety PLC interface (DC/DC converter), ATEX-PTC Thermistor Card
• Brake Chopper IGBT option
• Motion control options - Programmable Motion Controller, Synchronising Controller, Positioning Controller, Centre Winder Controller
• Power options - Brake resistors, Sine-Wave Filters, dU/dt Filters, Harmonic Filters (AHF)
• High power options - IEC Emergency Stop with Safety Relay, Safety Stop with Safety Relay, RFI Filters, NAMUR terminals, RCD, IRM, Mains shielding, Regen terminals
• Other accessories - IP21/NEMA 1 kit (convert IP20 to IP21), Profibus adapter, Sub-D9 Connector, Decoupling plate for Fieldbus cables, USB connection cable to PC, Panel Through Option, LCP panel mounting kit, Mounting brackets, Mains disconnect option

Cost saving heat management

VLT AutomationDrive FC 302 inverter drives are designed for efficient and cost-saving cooling.

Panel through cooling

An accessory mounting kit for small and mid-range drives enables heat losses to be dissipated directly outside the panel room.

Back channel cooling

By directing air through a rear cooling channel up to 85-90% of the drive’s heat loss is removed directly outside the installation room. 

No air over electronics

Complete separation between cooling air and the internal electronics ensure efficient cooling.

Specifications